AMT® 489D-95 High Head, Straight Centrifugal Pump

Part Number: 489D-95
The actual product may vary from images shown
$606.00
QTY:
  

489D-95 DETAILS

AMT® 489D-95 High Head Straight Centrifugal Pump.

AMT® high head end suction centrifugal pumps are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling, sprinkler/fire protection systems and pressure boosting. These heavy duty high pressure pumps are available in a variety of construction and seal materials to meet your specification. Pull-from-rear design for easy servicing without disturbing any piping. High efficiency closed impeller maximizes performance. Pumps are not self-priming and require flooded suction/positive suction pressure.

Features:

  • Cast iron construction
  • Stainless steel, high efficiency closed impeller
  • Carbon/Ceramic seal with Buna-N elastomers and o-ring
  • SiC/SiC seal with Viton® elastomers available
  • Discharge port rotates in 90 degree increments
  • Four front drain plugs located 90 degrees apart
  • NEMA base mounted, 3450 RPM motor
  • Stainless steel shaft and hardware
  • Maximum working pressure: 150 PSI
  • Maximum temperature: 180 F

Links to repair kits and optional equipment (where available) are located at the top and bottom of this page for your convenience.

Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP.
* AMT® 489D-95

489D-95 FEATURES

  • Cast Iron Construction with Stainless Steel, High Efficiency Closed Impeller
  • Pull-From-Rear Design for Easy Service Without Disturbing any Piping; Self-Cleaning Impeller
  • Pump is Close Coupled to TEFC Motor
  • Carbon/Ceramic Seal with Buna-N Elastomers and Buna-N O-Ring
  • Optional Factory Installed SiC/SiC Seal with Viton® Elastomers (489X-301-VS) or Carbon/Ceramic Seal with EPDM/EPR Elastomers and O-Ring (489X-301-E0)
  • Maximum Solids Size: 1/8"
  • Discharge Rotates in 90 Degree Increments
  • 4 Front Drain Plugs for Drainage in any Discharge Position
  • Pump is NOT self-priming and requires a flooded suction/positive suction pressure.

489D-95 SPECS

  • Pump Type: High Head Straight Centrifugal
  • Brand: AMT®
  • Shipping Weight LBS: 44
  • Shipping Length IN: 14.2
  • Main Material: Cast Iron
  • Shipping Height IN: 8.6
  • Displacement per Stroke (gal):
  • SKU: AT489D95SP
  • Engine Type:
  • MPN: 489D-95
  • Full Load Current:
  • Fuel Tank Capacity:
  • Customs Code: HTS Code 8413702005
    Schedule B Code 8413702005
    ECCN Code EAR99
  • Shipping Width IN: 10
  • Driver Type: Electric Motor
  • Outlet Size: 1
  • Inlet Size: 1.25
  • Elastomers: Buna-N
  • Motor Frame: 56J
  • Outlet Connection Type: FNPT
  • Model #:
  • Inlet Connection Type: FNPT
  • Max Solids Size: 0.125
  • Porting Position:
  • Max FLow Rate: 42 GPM
  • Power: 0.75
  • Run Time:
  • RPM: 3450
  • Seal Material: Carbon/Ceramic Mechanical Seal, Buna -N Elastomers
  • Max Discharge Pressure: 33.2999999999999