AMT® 489C-98 High Head, Straight Centrifugal Pump

AMT® 489C-98 High Head Straight Centrifugal Pump.

AMT® high head end suction centrifugal pumps are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling, sprinkler/fire protection systems and pressure boosting. These heavy duty high pressure pumps are available in a variety of construction and seal materials to meet your specification. Pull-from-rear design for easy servicing without disturbing any piping. High efficiency closed impeller maximizes performance. Pumps are not self-priming and require flooded suction/positive suction pressure.

Features:

• 300 Series investment cast stainless steel construction
• Stainless steel, high efficiency closed impeller
• Carbon/Ceramic seal with Viton® elastomers and o-ring
• SiC/SiC seal with Viton® elastomers available
• Discharge port rotates in 90 degree increments
• Four front drain plugs located 90 degrees apart
• NEMA base mounted, 3450 RPM motor
• Stainless steel shaft and hardware
• Maximum working pressure: 150 PSI
• Maximum temperature: 200 F

Links to repair kits and optional equipment (where available) are located at the top and bottom of this page for your convenience.

Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP.

Interchangeable with Grainger Part # 4XX99; Dayton Part # 4TU38; Teel Part # 4TU38

* AMT® 489C-98