AMT® 4240-95 Heavy Duty Straight Centrifugal Pump

Part Number: 4240-95
The actual product may vary from images shown
$1,732.50
QTY:
  

4240-95 DETAILS

AMT® 4240-95 Heavy Duty Straight Centrifugal Pump.

AMT® heavy duty solids handling end suction centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service, dirty water and other industrial applications. Semi-open impeller features self-cleaning ability that makes the unit useful in applications involving up to 1/4" diameter solids and muddy or dirty liquids, as well as clean, clear fluids. Discharge position can be adjusted in 90 Degree Increments with vent and drain plugs for all positions. Type 21 mechanical seal and O-Ring casing seal. Pumps are not self-priming and require flooded suction/positive suction pressure.

Features:

  • Cast iron construction
  • Self-cleaning stainless steel impeller
  • Carbon/Ceramic seal with Buna-N elastomers and o-ring
  • Optional SiC/SiC seal with Viton® elastomers available
  • Discharge rotates in 90 degree increments
  • Front drain plugs located 90 degrees apart
  • Maximum temperature: 180 F

Links to repair kits and optional equipment (where available) are located at the top and bottom of this page for your convenience.

Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP.

Interchangeable with Grainger Part # 4P939


* AMT® 4240-95

4240-95 FEATURES

  • Cast Iron Construction with 300 Series Stainless Steel Semi-Open, Self-Cleaning Impeller
  • Carbon/Ceramic Seal with Buna-N Elastomers & O-Ring
  • Optional Factory Installed SiC/SiC Seal with Viton® Elastomers (424X-301-VS)
  • Maximum Solids Size: 1/8"
  • Discharge Port Rotates in 90 Degree Increments with Vent and Drain Ports for All Positions
  • 7 1/2 HP TEFC , Three Phase, 230/460 VAC/60 Hz, 22/11 Full Load Amps, 184JM Frame Motor
  • Optional Factory Installed Seal Wash Available (A220-90). Adds Two Weeks to Lead Time and Requires Confirmation from Factory. Contact Springer Pumps for Availability.

4240-95 SPECS

  • Pump Type: Heavy Duty Straight Centrifugal
  • Brand: AMT®
  • Shipping Weight LBS: 157
  • Shipping Length IN: 26
  • Main Material: Cast Iron
  • Shipping Height IN: 10.6
  • Displacement per Stroke (gal):
  • SKU: AT424095SP
  • Engine Type:
  • MPN: 4240-95
  • Full Load Current:
  • Fuel Tank Capacity:
  • Customs Code: HTS Code 8413702005
    Schedule B Code 8413702005
    ECCN Code EAR99
  • Shipping Width IN: 15
  • Driver Type: Electric Motor
  • Outlet Size: 1.5
  • Inlet Size: 2
  • Elastomers: Buna-N
  • Motor Frame: 184JM
  • Outlet Connection Type: FNPT
  • Model #:
  • Inlet Connection Type: FNPT
  • Max Solids Size: 0.25
  • Porting Position:
  • Max FLow Rate: 210 GPM
  • Power: 7.5
  • Run Time:
  • RPM: 3450
  • Seal Material: Carbon/Ceramic Mechanical Seal, Buna -N Elastomers
  • Max Discharge Pressure: 71.9