AMT® 3151-98 Heavy Duty Straight Centrifugal Pump

AMT® 3151-98 Heavy Duty Straight Centrifugal Pump, Viton Seal. 3 HP TEFC (Totally Enclosed, Fan Cooled), 3 Phase, 230/460 VAC/60 Hz, 8/4 Full Load Amps, 182JM Frame Motor.

AMT® heavy duty solids handling end suction centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service, dirty water and other industrial applications. Stainless steel units are especially effective in applications where rust and/or corrosion can develop in systems. Semi-open impeller features self-cleaning ability that makes the unit useful in applications involving up to 1/4" diameter solids and muddy or dirty liquids, as well as clean, clear fluids. Discharge position can be adjusted in 90 Degree Increments with vent and drain plugs for all positions. Type 21 mechanical seal and O-Ring casing seal. Pumps are not self-priming and require flooded suction/positive suction pressure.

Features:

• Stainless steel construction
• Self-cleaning stainless steel impeller
• Carbon/Ceramic seal with Viton® elastomers and o-ring
• Optional SiC/SiC seal with Viton® elastomers available
• Discharge rotates in 90 degree increments
• Front drain plugs located 90 degrees apart
• Maximum temperature: 200 F

Links to repair kits and optional equipment (where available) are located at the top and bottom of this page for your convenience.

Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP.

Interchangeable with Grainger Part # 5ZT25

* AMT® 3151-98