AMT® 2875-95 Self-Priming Centrifugal Pump

AMT® 2875-95 Self-Priming Centrifugal Pump.

AMT® self-priming cast iron centrifugal pumps are designed for a broad range of high capacity applications, including dewatering, liquid transfer, circulation, drainage and irrigation. Dual volute design reduces radial load on motor. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenientpiping connections. All models are fitted with self-cleaning, semi-open stainless steel impeller, which can handle 3/8" diameter semi-solids. Built-in check valves for fast priming are standard on all units. Fill and drain plugs for easy installation and servicing.

Features:

• Cast iron construction
• Stainless steel, self-cleaning, semi-open impeller
• Carbon/Ceramic seal with Buna-N elastomers
• Buna-N check valve and o-ring
• Optional seals Viton® elastomers, o-ring and flapper/check valve available
  • Available with Cer/Car faces or SiC/SiC faces
  • See links at top of page
• Optional Car/Cer seal with Viton® elastomers, o-ring and flapper/check valve available
• 3? NPT suction and discharge ports
• Maximum solids handling to 3/8"
• Maximum temperature 180 F
• Maximum head height to 110 Ft.
• Self-priming to 20 Ft.
• Optional mounting base available

Links to repair kits and optional equipment (where available) are located at the top and bottom of this page for your convenience.

Interchangeable with Grainger Part # 3P706; Dayton Part # 4UA79; Teel Part # 4UA79

* AMT® 2875-95