AMT® 2822-98 Self-Priming Centrifugal Pump

AMT® 2822-98 Self-Priming Centrifugal Pump.

This line of AMT® self-priming centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature a self-cleaning clog resistant impeller capable of handling up to 3/8" diameter semi-solids. Built-In flapper/check valve enables consistent self-priming to 20 feet. Dual volute design reduces radial load on motor. Stainless steel models are especially effective in applications where rust and/or corrosion can develop in systems and also are highly resistant to erosion and chemicals.

Features:

• Stainless steel construction
• Carbon/Ceramic seal with Viton® elastomers
• Optional EPDM seal, o-ring and flapper/check valve available
• Optional SiC/SiC seal with Viton® elastomers available
• Self-cleaning, clog resistant impeller
• Handles 3/8" diameter semi-solids
• Self-priming to 20 Ft. with built-in check valve
• Dual volute design
• NEMA 56J motors with stainless steel shaft
• Maximum temperature: 200 F
• Maximum working pressure: 75 PSI
• Inlcudes steel base and handle

Links to repair kits and optional equipment (where available) are located at the top and bottom of this page for your convenience.

Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP.

Interchangeable with Grainger Part # 5ZT19; Dayton Part # 4UA74; Teel Part # 4UA74

* AMT® 2822-98