Bronze Marine Pumps

The AMT Model 3670-94 Naval Bronze Straight Centrifugal pump is designed for low-pressure salt water wash-down and recirculating applications. The pump has been sized for salt water (1.03 specific gravity) and feature provisions for the installation of a seal wash, front drain plug, and pull-from-rear design. The unit is driven by a 1/8 HP capacitor start induction motor (TEFC) with ball bearings and a stainless steel shaft. The on/off switch and line cord are standard. The AMT Model 4860-97 Bronze Centrifugal pump is compact and designed for use in general dewatering, salt water applications in live well tanks, circulation, and chemical transfer. This pump is fitted with a 1/8 HP, 12 Volt DC, 3700 RPM motor. Pumps are not self-priming and require flooded suction.

• Bronze Construction
• Buna-N Mechanical Seal and O-Ring
• Maximum Working Pressure 50 PSI
• Maximum Temperature 180° F
• Maximum Flow 17 GPM
• Maximum Head 12 Ft.
• Self-Cleaning, Semi-Open Impeller
• Totally Enclosed Motors
• 12 Volt DC or 115 VAC Motor, Depending on Model